Power Steering Pump Pulley Replacement

Power Steering Pump Pulley Replacement (4.2L)

Tools Required
* J 25033-C Power Steering Pump Pulley Installer
* J 25034-C Power Steering Pump Pulley Remover

Removal Procedure




1. Remove the drive belt. Refer to Drive Belt Replacement (Service and Repair).
2. Remove the power steering pump pulley using J 25034-C .

Installation Procedure




1. Install the power steering pump pulley to the end of the power steering pump shaft.
2. Install the power steering pump pulley to the power steering pump using J 25033-C .




3. Install the power steering pump pulley (1) flush against the end of the power steering pump shaft (2), with an allowable variance of 0.25 mm (0.01 in).
4. Install the drive belt. Refer to Drive Belt Replacement (Service and Repair).