Removal and Replacement

Front Fog Lamp Replacement (Envoy, TrailBlazer)

Removal Procedure

1. Remove the fog lamp bulb and socket. Refer to Front Fog Lamp Bulb Replacement (Service and Repair).




2. Remove the 3 nuts that retain the fog lamp to the fascia (2).
3. Remove the fog lamp from the fascia.

Installation Procedure




1. Install the fog lamp to the fascia (2).

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the 3 fog lamp retaining nuts.

Tighten the nuts to 10.0 Nm (88 lb in).

3. Install the fog lamp bulb and socket. Refer to Front Fog Lamp Bulb Replacement (Service and Repair).
4. Aim the fog lamp(s). Refer to Fog Lamp Aiming (Procedures).