Recirculation Door Replacement

Recirculation Door Replacement

Removal Procedure

1. Remove the HVAC module assembly. Refer to HVAC Module Assembly Replacement (Service and Repair).
2. Remove the screws retaining the recirculation assembly to the HVAC module assembly.
3. Remove the screws from the recirculation actuator.
4. Remove recirculation actuator.




5. Remove the recirculation door (1) from the recirculation assembly.

Installation Procedure




1. Install the recirculation door (1) to the recirculation assembly.
2. Install the recirculation actuator.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the screws to the recirculation actuator and tighten to 1.9 Nm (18 lb in).
4. Install the screws to assemble the recirculation assembly and tighten to 1.9 Nm (18 lb in).
5. Install the HVAC module assembly. Refer to HVAC Module Assembly Replacement (Service and Repair).