Digital Radio Antenna Replacement

Digital Radio Antenna Replacement

Removal Procedure

1. Lower the front portion of the headliner. Refer to Headlining Trim Panel Replacement (Service and Repair).




2. Disconnect the electrical connectors from the digital radio antenna assembly.
3. Loosen the retaining nut until the assembly can be removed from the roof panel.
4. Using an upward motion, remove the antenna assembly from the roof.

Installation Procedure




1. Install the antenna assembly from the top of the roof.
2. Lower the antenna assembly to the roof panel, ensuring the anti-rotation pin is properly indexed.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Tighten the retaining nut.

Tighten the nut to 6 Nm (53 lb in).

4. Connect the antenna electrical connectors.
5. Install the headliner. Refer to Headlining Trim Panel Replacement (Service and Repair).