35. Engine Flywheel Cleaning and Inspection

Engine Flywheel Cleaning and Inspection




1. Clean the flex plate in solvent.
Warning: Refer to Safety Glasses Warning (Safety Glasses Warning).
2. Dry the flex plate with compressed air.
3. Inspect the flex plate for the following conditions:

* Damaged ring gear teeth (1)
* Stress cracks around the flex plate-to-crankshaft bolt hole locations (2)

Important: Do not attempt to repair the welded areas that retain the ring gear to the flex plate. Install a new flex plate.

* Welded areas (3) that retain the ring gear onto the flex plate for cracking