Solar Sensor: Service and Repair

Sun Load Temperature Sensor Replacement

Removal Procedure




1. Remove the I/P upper trim pad. Refer to Instrument Panel Upper Trim Pad Replacement (Service and Repair).
2. Remove the sun load sensor from the I/P upper trim pad by turning counter clockwise.
3. Disconnect the electrical connector from the sun load sensor.

Installation Procedure




1. Connect the electrical connector to the sun load sensor.
2. Install the sun load sensor to the I/P upper trim pad by turning clockwise.
3. Install the I/P upper trim pad. Refer to Instrument Panel Upper Trim Pad Replacement (Service and Repair).