Rear Bumper Replacement

Rear Bumper Replacement


Removal Procedure

1.Mark the location of the braces and the fasteners.





2.Remove the nuts (1) that retain the rear bumper outer and inner braces to the frame.

3.Remove the bumper (3) from the vehicle.

4.Remove the rear bumper braces from the bumper. Refer to Rear Bumper Bracket Replacement Rear Bumper Bracket Replacement .

5.Remove the rear bumper step pad from the bumper. Refer to Rear Bumper Step Pad Replacement .

6.Remove the rear bumper step pad extensions from the bumper, if equipped. Refer to Rear Bumper Step Pad Extension Replacement .

Installation Procedure

1.Install the rear bumper step pad to the bumper. Refer to Rear Bumper Step Pad Replacement .

2.Install the rear bumper step pad extensions to the bumper. Refer to Rear Bumper Step Pad Extension Replacement .

3.Install the rear bumper braces to the bumper. Refer to Rear Bumper Bracket Replacement Rear Bumper Bracket Replacement .





4.Install the bumper (3) to the vehicle.

Caution:Refer to Fastener Caution .

5.Install the inner and outer bumper impact bar brace retaining nuts (1) to the frame and tighten to50 N �m (37 lb ft).