4th Clutch Assembly Disassemble

4th Clutch Assembly Disassemble

Special Tools
* J 23327 - Clutch Spring Compressor
* J 38731-3 - Fourth Clutch Piston and Housing Seal Spacer
* J 38882 - Fourth Clutch Spring and Retainer Assembly Adapter

For equivalent regional tools, refer to Special Tools (Tools and Equipment).




1. Remove the fourth clutch backing plate retainer ring (523).




2. Remove the fourth clutch backing plate (524).
3. Remove the fourth clutch plates (525, 526).




4. Place the fourth clutch housing (529) onto the J 38731-3 - seal spacer.
5. Using the J 38882 - retainer assembly adapter and the J 23327 - spring compressor , compress the fourth clutch spring assembly (532).
6. Remove the fourth clutch spring retainer ring (533).
7. Remove the J 38882 - retainer assembly adapter and the J 23327 - spring compressor.
8. Remove the fourth clutch spring assembly (532).




9. Remove the fourth clutch piston (528).
10. Remove the fourth clutch piston inner seal (527).
11. Remove the fourth clutch piston outer seal (531) from the fourth clutch housing (529).
12. Inspect the fourth clutch orifice (530). The small hole in the orifice should be open approximately 0.51 mm (0.020 in).