16. Engine Coolant Thermostat Housing Removal

Engine Coolant Thermostat Housing Removal




1. Disconnect and remove the turbocharger vane position sensor.




2. Disconnect the turbocharger coolant inlet hose.




3. Remove the fuel and electrical harness bracket bolt.
4. Remove the fuel and electrical harness bracket.




5. Remove the oil fill tube bolts.




6. Remove the oil fill tube.




7. Disconnect the coolant temperature sensor.




8. Remove the exhaust gas recirculation (EGR) coolant pipe bolts.
9. Remove the EGR coolant pipe.




10. Remove the water pump inlet pipe bolts.




11. Remove the turbocharger coolant outlet hose and clamps.




12. Remove the water pump inlet pipe.




13. Remove the fuel pipe bracket bolt.




14. Remove the thermostat housing bolts.
15. Remove the thermostat housing.