112. Exhaust Gas Recirculation Valve and Cooler Installation

Exhaust Gas Recirculation Valve and Cooler Installation





1. Install the intake manifold tube.




2. Install the exhaust gas recirculation (EGR) cooler bracket.
Caution: Refer to Fastener Caution (Fastener Caution) .
3. Install the EGR cooler bracket bolts and tighten to 25 Nm (18 lb ft) .




4. Install the EGR and cooler.




5. Install the EGR mount bolt and tighten to 50 Nm (37 lb ft) .




6. Install the top EGR cooler bolts and tighten to 25 Nm (18 lb ft) .




7. Install the air inlet tube.
8. Install the air inlet tube nuts and tighten to 25 Nm (18 lb ft) .




9. Install the air inlet tube to intake manifold tube bolt and nut. Tighten the air inlet tube to intake manifold tube bolt and nut to 25 Nm (18 lb ft) .