Brakes and Traction Control: Specifications
FRONT BRAKE ROTOR/DISCMINIMUM & DISCARD THICKNESS
Rotor Minimum Thickness* 27.5 mm (1.08 in)
THICKNESS VARIATION/RUNOUT
Rotor Maximum Allowable Assembled Lateral Runout 0.06 mm (0.002 in)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 in)
REAR BRAKE ROTOR/DISC
MINIMUM & DISCARD THICKNESS
Rotor Minimum Thickness* 18.4 mm (0.72 in)
THICKNESS VARIATION/RUNOUT
Rotor Maximum Allowable Assembled Lateral Runout 0.06 mm (0.002 in)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 in)
* All brake rotors have a minimum thickness dimension cast into them. Replace any rotor that is worn or machined below this specification.