Seat Belt Height Adjuster: Service and Repair

Seat Belt Height Adjuster Replacement - Front

Removal Procedure




1. Using a flat bladed tool, remove the shoulder/seat belt guide to the guide trim cover (1).




2. Remove the bolt retaining the shoulder/seat belt guide to the guide adjuster.
3. Remove the shoulder/seat belt guide from the guide adjuster.
4. Remove the front door upper pillar garnish molding. Refer to Upper Pillar Garnish Molding Replacement (Upper Pillar Garnish Molding Replacement).




5. Remove the shoulder/seat belt guide adjuster retaining bolts from the pillar.
6. Remove the shoulder/seat belt guide adjuster from the vehicle.

Installation Procedure




1. Install the shoulder/seat belt guide adjuster to the vehicle.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the shoulder/seat belt guide adjuster retaining bolts to the pillar and tighten to 26 Nm (19 lb ft).




3. Install the shoulder/seat belt guide to the guide adjuster.
4. Install the shoulder/seat belt guide retaining bolt to the guide adjuster and tighten to 52 Nm (38 lb ft).
5. Install the front door upper pillar garnish molding. Refer to Upper Pillar Garnish Molding Replacement (Upper Pillar Garnish Molding Replacement).




6. Install the shoulder/seat belt guide to the guide adjuster cover (1).