Sliding Door: Adjustments

Sliding Rear Side Door Adjustment

Up and Down Adjustment

1. Remove the sliding side door upper roller cover. Refer to Rear Side Door Upper Roller Bracket Garnish Molding Replacement (Rear Side Door Upper Roller Bracket Garnish Molding Replacement).
2. Remove the sliding side door lower roller cover.




3. Loosen the bolts that retain the upper front roller to the door.




4. Loosen the bolts that retain the lower front roller to the door.
5. Loosen the nuts that retain the rear roller to the door.
6. Adjust the door up or down until you obtain the desired position.

Caution: Refer to Fastener Caution (Fastener Caution).

7. Tighten the nuts that retain the rear roller to the door to 25 Nm (18 lb ft).




8. Tighten the bolts that retain the upper front roller to the door to 25 Nm (18 lb ft).




9. Tighten the bolts that retain the lower front roller to the door to 25 Nm (18 lb ft).
10. Install the sliding side door lower roller cover.
11. Install the sliding side door upper roller cover. Refer to Rear Side Door Upper Roller Bracket Garnish Molding Replacement (Rear Side Door Upper Roller Bracket Garnish Molding Replacement).

In and Out Adjustment

1. Remove the sliding side door upper roller cover. Refer to Rear Side Door Upper Roller Bracket Garnish Molding Replacement (Rear Side Door Upper Roller Bracket Garnish Molding Replacement).
2. Remove the sliding side door lower roller cover.




3. Loosen the bolts that retain the upper front roller to the bracket.




4. Loosen the bolts that retain the lower front roller to the bracket.
5. Adjust the door in or out until you obtain the desired position.




6. Tighten the bolts that retain the upper front roller to the bracket to 25 Nm (18 lb ft).




7. Tighten the bolts that retain the lower front roller to the bracket to 25 Nm (18 lb ft).
8. Install the sliding side door lower roller cover.
9. Install the sliding side door upper roller cover. Refer to Rear Side Door Upper Roller Bracket Garnish Molding Replacement (Rear Side Door Upper Roller Bracket Garnish Molding Replacement).