Rear Side Door Lock Replacement (Extended Cab Upper)

Rear Side Door Lock Replacement (Extended Cab Upper)

Removal Procedure

1. Open the rear side door.
2. Remove the rear side door trim panel. Refer to Rear Side Access Door Trim Panel Replacement (Rear Side Access Door Trim Panel Replacement).




3. Remove the screws (1) retaining the upper latch to the rear side door.
4. Disconnect the upper latch cable (2) from the latch by releasing the retaining clip.
5. Remove the upper latch (3) from the rear side door.

Installation Procedure




1. Install the upper latch (3) to the rear side door.
2. Connect the upper latch cable (2) to the latch using the retaining clips.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Loosely install the screws (1) retaining the upper latch to the rear side door.

Tighten the lower rear side door upper latch bolts (1) until the latch bracket is flush to the door panel.

4. Close the rear side door to self align the upper latch.
5. Finish tightening the lower rear side door upper latch bolts.

Tighten the upper latch bolts to 9 Nm (80 lb in).

6. Open the rear side door.
7. Install the rear side door upper latch bolt (1).

Tighten the upper latch bolt to 9 Nm (80 lb in).

8. Install the rear side door trim panel. Refer to Rear Side Access Door Trim Panel Replacement (Rear Side Access Door Trim Panel Replacement).
9. Close the rear side door.