Removal and Replacement

Brake Drum Replacement

Special Tools

J-42450-A - Wheel Hub Resurfacing Kit

Removal Procedure
Warning: Refer to Brake Dust Warning (Brake Dust Warning).


1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (Service and Repair).




3. Remove and discard the brake drum retainers (1), if equipped.




4. Remove the brake drum (1).
5. If the brake shoes prevent the brake drum from being removed, retract the brake shoe adjuster. Refer to Drum Brake Adjustment (Adjustments).

Installation Procedure

1. Using the J-42450-A - Wheel Hub Resurfacing Kit , remove any corrosion from the rear axle flange contact surface.




2. Install the brake drum (1).
3. Adjust the drum brakes. Refer to Drum Brake Adjustment (Adjustments).
4. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (Service and Repair).