Oil Pan Cover Replacement

Oil Pan Cover Replacement

Removal Procedure




1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the oil pan cover bolts (435), cover (434), and gasket (433). Discard the gasket.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Position a NEW oil pan cover gasket (433) and the cover (434) to the oil pan and install the bolts (435). Tighten the bolts to 12 Nm (106 lb in).
2. Lower the vehicle.