60. Clutch Pilot Bearing Installation

Clutch Pilot Bearing Installation

Special Tools
* J 8433 - Two Jaw Puller
* J 45949 - Pilot Bearing and Flywheel Locator Installer




1. Position the bearing to the rear of the crankshaft.
2. Assemble the J 8433 - two jaw puller (2), the J 45949 - pilot bearing and flywheel locator installer (1) and bolts to the rear of the crankshaft.
Tighten the bolts until snug.
3. Rotate the bolt of the J 8433 - two jaw puller (2) until the bearing is seated in the bore of the crankshaft.
4. Remove the tools.




5. Inspect the clutch pilot bearing for proper installation.