6.0L RPO L96 VIN G

Crankshaft Main Bearing Bore Diameter 69.871-69.889 mm (2.75-2.751 in.)
Crankshaft Main Bearing Bore Out-of-Round 0.006 mm (0.0002 in.)
Crankshaft Main Bearing Clearance - Production 0.02-0.052 mm (0.0008-0.0021 in.)
Crankshaft Main Bearing Clearance - Service 0.02-0.065 mm (0.0008-0.0025 in.)

NEW Crankshaft Bearing Cap Bolts








M8 Bolts (1-5) - First Pass in Sequence 20 Nm (15 lb ft.)
M8 Bolts (1-5) - Second Pass in Sequence 30 Nm (22 lb ft.)
M8 Bolts (6-10) - First Pass in Sequence 20 Nm (15 lb ft.)
M8 Bolts (6-10) - Second Pass in Sequence 30 Nm (22 lb ft.)
M10 Bolts - First Pass in Sequence 20 Nm (15 lb ft.)
M10 Bolts - Final Pass in Sequence 80 degrees
M10 Studs - First Pass in Sequence 20 Nm (15 lb ft.)
M10 Studs - Final Pass in Sequence 51 degrees