Generator Bracket Replacement (V8)

Generator Bracket Replacement (V8)

Removal Procedure




1. Remove the generator. Refer to Generator Replacement (V6) (Service and Repair)Generator Replacement (V8) (Service and Repair)Generator Replacement (6.6L) (Service and Repair).
2. Remove the power steering pump. Refer to Power Steering Pump Replacement (4.8L, 5.3L, 6.0L, and 6.2L) (Service and Repair)Power Steering Pump Replacement (4.3L) (Service and Repair)Power Steering Pump Replacement (6.6L) (Service and Repair).
3. Remove the engine wiring harness clip bolt (3) are reposition the clip (1) away from the generator bracket.




4. Remove the generator bracket bolts.
5. Remove the generator bracket.

Installation Procedure




1. Position the generator bracket to the engine.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the generator bracket bolts.

Tighten the bolts to 50 Nm (37 lb ft).




3. Position the engine wiring harness clip (1) to the generator bracket and install the engine harness clip bolt (3).

Tighten the bolt to 9 Nm (80 lb in).

4. Install the power steering pump. Refer to Power Steering Pump Replacement (4.8L, 5.3L, 6.0L, and 6.2L) (Service and Repair)Power Steering Pump Replacement (4.3L) (Service and Repair)Power Steering Pump Replacement (6.6L) (Service and Repair).
5. Install the generator. Refer to Generator Replacement (V6) (Service and Repair)Generator Replacement (V8) (Service and Repair)Generator Replacement (6.6L) (Service and Repair).