Intake Air Temperature (IAT) Sensor 2 Replacement

Intake Air Temperature (IAT) Sensor 2 Replacement

Removal Procedure




1. Remove the air intake pipe. Refer to Air Intake Pipe Replacement (Air Intake Pipe Replacement).
2. Disconnect the engine wiring harness electrical connector (1) from the intake air temperature (IAT) sensor pigtail.
3. Remove the IAT sensor (2) from the center intake manifold.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the IAT sensor (2) to the center intake manifold.

Tighten the sensor to 25 Nm (18 lb ft).

2. Connect the engine wiring harness electrical connector (1) to the IAT sensor pigtail.
3. Install the air intake pipe. Refer to Air Intake Pipe Replacement (Air Intake Pipe Replacement).