Air Cleaner Housing: Service and Repair

Air Cleaner Assembly Replacement

Removal Procedure




1. Disconnect the engine wiring harness electrical connector (1) from the mass air flow (MAF)/intake air temperature (IAT) sensor.
2. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (Air Cleaner Outlet Duct Replacement).




3. Grasp the air cleaner assembly and pull up on the assembly in order to disengage the retaining pins from the grommets.

Installation Procedure




1. Line up the retaining pins with the grommets.
2. Install the air cleaner assembly until the air cleaner is seated fully on the mounts and is up against the fender apron.




3. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (Air Cleaner Outlet Duct Replacement).
4. Connect the engine wiring harness electrical connector (1) to the MAF/IAT sensor.