58. 2-6 Clutch Plate Inspection

2-6 Clutch Plate Inspection





Important:
* Perform the following measurements at 3 or more locations.

* Check the plates for coning on a level surface.

* Replace any parts not meeting specifications.


1. Measure the thickness of each 2-6 clutch fiber plate (1) at dimension A.

The 2-6 clutch fiber plate minimum thickness is 2.375 mm (0.0935 in).

2. Measure the oil groove depth of each 2-6 clutch fiber plate (1) at dimension B.

The 2-6 clutch fiber plate oil groove minimum depth is 0.2 mm (0.0079 in).




3. Measure the cone of each 2-6 clutch fiber plate (1) at dimension A.

The 2-6 clutch fiber plate maximum cone is 0.225 mm (0.0089 in).




4. Measure the thickness of each 2-6 clutch steel plate (1) at dimension A.

The 2-6 clutch steel plate minimum thickness is 2.44 mm (0.096 in).




5. Measure the cone of each 2-6 clutch steel plate (1) at dimension A.

The 2-6 clutch steel plate maximum cone is 0.4 mm (0.0157 in).




6. Measure the thickness of the 2-6 clutch spring plate (1) at dimension A.

The 2-6 clutch spring plate minimum thickness is 3.11 mm (0.1224 in).




7. Measure the cone of the 2-6 clutch spring plate (1) at dimension A.

The 2-6 clutch spring plate maximum cone is 0.4 mm (0.0157 in).