Cylinder Head Assembly
Cylinder head boltsDO NOT reuse the old cylinder head bolts
Left Sequence:
Right Sequence:
First pass M11 bolts (1) 30 Nm (22 lb ft)
Second pass M11 bolts (1) additional 150 degrees
First pass M8 bolts (2) 15 Nm (11 lb ft)
Second pass M8 bolts (2) additional 75 degrees
Deck Flatness
Warpage limit less than 0.05 mm (0.002 in)
Intake manifold
First pass 23 Nm (17 lb ft)
Second pass 23 Nm (17 lb ft)
Camshaft bearing caps
Left (DI):
Right (DI):
First pass 10 Nm (89 lb in)
Second pass Loosen bolts 1, 2, 3, 4
Final pass bolts 1, 2, 3, 4 10 Nm (89 lb in)
Camshaft position actuator 58 Nm (43 lb ft)