Rear Bench Seat Replacement

Rear Bench Seat Replacement

Removal Procedure




1. Remove the 2 nuts securing the front legs of the rear bench seat to the floor studs.
2. Remove the 2 nuts securing the rear of the rear bench seat to the floor studs.
3. Remove the rear bench seat from the vehicle.

Installation Procedure

1. Position the rear bench seat on the floor studs.





Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the 2 bolts securing the rear of the bench seat to the floor studs.

Tighten the rear bench seat mounting nuts to 52.5 Nm (39 lb ft).

3. Install the 2 nuts securing the front legs of the rear bench seat to the floor studs.

Tighten the rear bench seat mounting nuts to 52.5 Nm (39 lb ft).