16. Transmission Extension Assemble

Transmission Extension Assemble




1. For the 4WD transmission, install the shift control shaft plug.




2. If removed, install the reverse control lever restrictor.




3. Install a new reverse control lever restrictor roll pin.





Caution: Refer to Fastener Caution (Fastener Caution).

4. Install a new reverse restrictor pin plug and tighten to 19 Nm (14 lb ft).




5. Install the oil receiver.




6. If RWD, install the oil trough.
7. Install the oil trough bolt and tighten to 11 Nm (8 lb ft).