Instrument Panel Accessory Trim Plate Replacement

Instrument Panel Accessory Trim Plate Replacement

Removal Procedure




1. Carefully use a plastic flat-bladed tool to release the trim plate retaining clips.
2. Remove the trim plate from the instrument panel (I/P).
3. Disconnect the electrical connectors, as necessary.
4. When replacing the instrument panel accessory trim plate, transfer all necessary components.

Installation Procedure




1. Install the electrical connectors, as necessary.
2. Position the trim plate to the I/P.
3. Ensure the retaining clips are indexed to the corresponding slots provided in the I/P.
4. Seat the trim plate retaining clips to the I/P.