Docid=2078005

2-4 Band Servo Piston Pin Length Check

Special Tools

J 33037 - 2-4 Intermediate Band Apply Pin Gauge




1. Disassemble the 2-4 servo assembly. Remove the apply pin retaining ring (24), the servo apply pin washer (23), the servo apply pin spring (22) and the 2nd apply piston pin (13).




2. Install the band apply pin (13) and the J 33037 - pin
gauge (1).
3. Install the servo cover retaining ring (29) to secure the tool.




4. Apply 11 Nm (98 lb in) torque. If the white line appears in the gauge slot (1), the pin length is correct.
5. If a new pin is needed, refer to 2-4 Band Servo Piston Pin Selection (2-4 Band Servo Piston Pin Selection) in order to determine correct pin length.