Driver or Passenger Seat Back Cushion Finish Panel Replacement

Driver or Passenger Seat Back Cushion Finish Panel Replacement

Removal Procedure

1. Remove the seat from the vehicle. Refer to Split Bench Seat Replacement (Split Bench Seat Replacement) or Front Seat Replacement - Bucket (Front Seat Replacement - Bucket).
2. Remove the front seat back cover and pad. Refer to Driver or Passenger Seat Back Cushion Cover and Pad Replacement (Driver or Passenger Seat Back Cushion Cover and Pad Replacement).




3. Remove the 2 hog ring fasteners (3) on the bottom of the seat back panel (2).
4. Remove the push-pin fastener (1) from the top of the seat back panel.
5. Remove the seat-back panel.

Installation Procedure

1. Position the seat back panel on the seat-back frame.
2. Install the seat back panel to the frame with a push-pin fastener (1) at the top of the panel.




3. Install the 2 hog ring fasteners (3) to the bottom of the seat back panel (2).
4. Install the front seat back cover and pad. Refer to Driver or Passenger Seat Back Cushion Cover and Pad Replacement (Driver or Passenger Seat Back Cushion Cover and Pad Replacement).
5. Install the seat in the vehicle. Refer to Split Bench Seat Replacement (Split Bench Seat Replacement) or Front Seat Replacement - Bucket (Front Seat Replacement - Bucket).