Air Conditioning Compressor Belt Replacement

Air Conditioning Compressor Belt Replacement

Removal Procedure




1. Remove the accessory belt. Refer to Drive Belt Replacement - Accessory (Drive Belt Replacement - Accessory).
2. Remove the engine protection shield. Refer to Engine Protection Shield Replacement (Service and Repair).
3. Cut the belt (1) from the air conditioning (A/C) and crankshaft pulleys.

Installation Procedure




1. Position the belt behind the rear face of the balancer and around the A/C pulley.




2. Install the belt installation tool onto the balancer.




3. Slowly rotate the crankshaft pulley in a counterclockwise direction 180 degrees (a) while using finger pressure to pull the belt forward. Ensure the ribbed area of the belt remains facing forward and the belt aligns properly to the A/C pulley.





Note: As the balancer is rotated clockwise, the belt installation tool will release from the belt.

4. After installation of the belt, rotate the balancer clockwise 360 degrees (a).




5. Inspect the drive belt (1) for proper installation and alignment.
6. Install the skid plate. Refer to Engine Protection Shield Replacement (Service and Repair).
7. Install the accessory drive belt. Refer to Drive Belt Replacement - Accessory (Drive Belt Replacement - Accessory).