Rear Brake Shield Replacement

Rear Brake Shield Replacement

Removal Procedure
Warning: Refer to Brake Dust Warning (Brake Dust Warning).


1. Disable the parking brake cable adjuster. Refer to Parking Brake Cable Adjuster Disabling (Parking Brake Cable Adjuster Disabling).
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
3. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (Service and Repair).
4. Remove the parking brake shoes. Refer to Parking Brake Shoe Replacement Service and Repair.
5. Remove the parking brake actuator. Refer to Parking Brake Actuator Replacement Service and Repair.




6. Remove the brake shield bolts (1).




7. Remove the brake shield (1).

Installation Procedure




1. Install the brake shield (1).





Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the brake shield bolts (1) and tighten to 10 Nm (89 lb in).
3. Install the parking brake actuator. Refer to Parking Brake Actuator Replacement Service and Repair.
4. Install the parking brake shoes. Refer to Parking Brake Shoe Replacement Service and Repair.
5. Adjust the parking brake. Refer to Parking Brake Adjustment Adjustments.
6. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (Service and Repair).
7. Enable the parking brake cable adjuster. Refer to Parking Brake Cable Adjuster Enabling (Parking Brake Cable Adjuster Enabling).