Rear Seat Back Cushion Replacement

Rear Seat Back Cushion Replacement

Removal Procedure

1. Remove the rear seat from the vehicle. Refer to Rear Bench Seat Replacement (Rear Bench Seat Replacement).
2. Remove the seat back cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement (Rear Seat Back Cushion Cover and Pad Replacement).
3. Remove the 2 bolts at the outer seat riser from the seat back frame.





Note: Note the position and the length of the bolts removed. This will assist with reassembly.

4. Remove the right and left bolts that retain the seat back frame to the seat back hinges.




5. Remove the seat back frame.

Installation Procedure




1. Install the seat back frame.





Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the bolts that retain the seat back frame to the seat back hinges in the locations noted during disassembly and tighten to 30 Nm (22 lb ft).
3. Install the 2 bolts at the outer seat riser from the seat back frame and tighten to 30 Nm (22 lb ft).
4. Install the seat back cover and pad. Refer to Rear Seat Cushion Cover and Pad Replacement (Rear Seat Cushion Cover and Pad Replacement).
5. Install the rear seat in the vehicle. Refer to Rear Bench Seat Replacement (Rear Bench Seat Replacement).