57. 2-6 Clutch Plate Inspection

2-6 Clutch Plate Inspection





Note:
* Perform the following measurements at 3 or more locations.
* Check the plates for coning on a level surface.
* Replace any parts not meeting specifications.

1. Measure the thickness of each 2-6 clutch fiber plate (1) at dimension A.

The 2-6 clutch fiber plate minimum thickness is 1.675 mm (0.0659 in).




2. Measure the cone of each 2-6 clutch fiber plate (1) at dimension A.

The 2-6 clutch fiber plate maximum cone is 0.225 mm (0.0089 in).




3. Measure the thickness of each 2-6 clutch steel plate (1) at dimension A.

The 2-6 clutch steel plate minimum thickness is 2.44 mm (0.096 in).




4. Measure the cone of each 2-6 clutch steel plate (1) at dimension A.

The 2-6 clutch steel plate maximum cone is 0.4 mm (0.0157 in).