64. Generator and Drive Belt Tensioner Bracket Removal

Generator and Drive Belt Tensioner Bracket Removal




1. Disconnect the glow plug controller wiring harness (1).




2. Remove the glow plug controller bracket bolts (1).
3. Remove the glow plug controller bracket (2).




4. Remove the upper intake manifold brace bolts (2) and (3).
5. Remove the upper intake manifold brace (1).




6. Remove the fuel feed pipe clip bracket bolt (1).




7. Remove the drive belt tensioner bolt (1).
8. Remove the drive belt tensioner (2).




9. Remove the generator and drive belt tensioner mounting bracket bolt (4) and nuts (1).
10. Remove the generator and drive belt tensioner mounting bracket (3).
11. Remove the generator and drive belt tensioner mounting bracket studs (2).