Rear License Plate Lamp Replacement (Silverado GMC)

Rear License Plate Lamp Replacement (Silverado GMC)

Removal Procedure




1. Ensure the headlamp switch is in the OFF position.
2. Reach under the rear bumper and press on the lens end of the cover in order to release the locking tab.
3. Remove the lens housing from the bumper assembly.
4. Remove the bulb.

Installation Procedure




1. Install the bulb.
2. Install the rear edge of the lens housing into the rear bumper.
3. Push on the lens side of the housing in order to snap the housing into the rear bumper assembly.
4. Inspect the operation.