142500 MI or 228000 KM
LubricateSuspension
Lubricate the front suspension, steering linkage, and parking brake cable guides. Control arm ball joints on 2500/3500 series vehicles require lubrication but should not be lubricated unless their temperature is -12 degrees C (10 degrees F) or higher, or they could be damaged. Control arm ball joints on 1500 series vehicles are maintenance-free. Vehicles used under severe commercial operating conditions require lubrication on a regular basis every 5 000 km/3,000 miles.
Doors
Lubricate body components. Lubricate all key lock cylinders, hood latch assembly, secondary latch, pivots, spring anchor, release pawl, rear compartment hinges, outer liftgate handle pivot points. More frequent lubrication may be required when exposed to a corrosive environment. Applying silicone grease on Lubricate body hinges and latches, key lock cylinders, hood latch assemblies, secondary latches, pivots, spring anchor and release pawl, hood and door hinges, rear folding seats, and liftgate hinges. More frequent lubrication may be required when the vehicle is exposed to a corrosive environment. Applying silicone grease on weatherstrips with a clean cloth makes them last longer, seal better, and not stick or squeak.
Inspect
Wiper Blade
Inspect wiper blades for wear, cracking, or contamination. Clean the windshield and wiper blades, if contaminated. Replace wiper blades that are worn or damaged.
Washer Fluid
Inspect windshield washer fluid level and add fluid as needed.
Tires
Inspect tire inflation pressures and wear.
Steering and Suspension
Visually inspect front and rear suspension and steering system for damaged, loose, or missing parts, signs of wear.
Restraints and Safety Systems
Inspect restraint system components. Make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired. Have any torn or frayed safety belts replaced. Also look for any opened or broken air bag coverings, and have them repaired or replaced. The air bag system does not need regular maintenance.
Intake Air Duct
Air intake system check. Check the air intake system installation to assure that gaskets are properly sealed and that all hose connections, fasteners, and other components are tight. Also check to be sure that the air cleaner housing is properly seated and the cover fits tightly. Tighten connections and fasteners or replace damaged parts as necessary.
Heat Shield, Exhaust
Shields inspection for damage or looseness. Adjust or replace as required.
Fuel Supply Line
Inspect fuel system for damage or leaks.
Fluids
Fluids visual leak check (or every 12 months, whichever occurs first). A leak in any system must be repaired and the fluid level checked.
Exhaust System
Inspect exhaust system, including DPF pressure lines, and nearby heat shields inspection for loose or damaged components. Check to be sure that mud or dirt is not caked on the exhaust system, especially in the area of the diesel particulate filter and tailpipe. Clean the area as needed. At high mileages, the DPF becomes loaded with ash. This is normal. When the amount of ash loading is high, clean or replace.
Diesel Emissions Fluid
Add diesel emissions fluid.
Cooling System
Inspect engine cooling system. Visual inspection of hoses, pipes, fittings, and clamps. Replace as needed.
Coolant
Inspect engine coolant level. Add coolant if necessary.
Brakes and Traction Control
Inspect Brake System (or every 12 months whicherer occurs first). Visually inspect brake lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc. Inspect disc brake pads for wear and rotors for surface condition. Inspect other brake parts, including calipers, parking brake, etc.
Air Filter Element
Inspect engine air cleaner filter. If necessary, replace filter.
Replace
Oil Filter, Engine
Engine Oil
Change engine oil and filter, or every 12 months whichever occurs first. Reset the oil life system.
Rotate
Wheels and Tires
Rotate tires if necessary. Reset tire pressure monitor.