Connecting Rod, Engine

Connecting Rod Bolt

First Pass 25 Nm (18 lb ft)
Final Pass 100 degrees

Connecting Rod Bearing Clearance 0.029-0.073 mm (0.0011-0.0029 in)

Connecting Rod Bore Diameter - Bearing End 52.118-52.134 mm (2.0519-2.05252 in)

Connecting Rod Side Clearance 0.070-0.370 mm (0.0028-0.0146 in)

Connecting Rod Straightness - Bend - Maximum 0.021 mm (0.0083 in)

Connecting Rod Straightness - Twist - Maximum 0.04 mm (0.0157 in)

Connecting Rod Bore Diameter - Pin End 20.007-20.017 mm (0.7877-0.7881 in)