150000 MI or 240000 KM

Lubricate
    Suspension
      Lubricate the front suspension, steering linkage, and parking brake cable guides. For vehicles mainly driven in heavy city traffic in hot weather, in hilly or mountainous terrain, when frequently towing a trailer, or used for taxi, police, or delivery service, lubricate every 5 000 km/3,000 miles. Control arm ball joints on 2500 series vehicles require lubrication but should not be lubricated unless their temperature is -12 degrees C (10 degrees F) or higher, or they could be damaged. Control arm ball joints on 1500 series vehicles are maintenance-free.
    Doors
      Lubricate body components. Lubricate all key lock cylinders, hood latch assembly, secondary latch, pivots, spring anchor, release pawl, rear compartment hinges, outer liftgate handle pivot points. More frequent lubrication may be required when exposed to a corrosive environment. Applying silicone grease on Lubricate body hinges and latches, key lock cylinders, hood latch assemblies, secondary latches, pivots, spring anchor and release pawl, hood and door hinges, rear folding seats, and liftgate hinges. More frequent lubrication may be required when the vehicle is exposed to a corrosive environment. Applying silicone grease on weatherstrips with a clean cloth makes them last longer, seal better, and not stick or squeak.
Inspect
    Wiper Blade
      Inspect wiper blades for wear, cracking, or contamination. Clean the windshield and wiper blades, if contaminated. Replace wiper blades that are worn or damaged.
    Washer Fluid
      Inspect windshield washer fluid level and add fluid as needed.
    Tires
      Inspect tire inflation pressures and wear.
    Steering and Suspension
      Visually inspect front and rear suspension and steering system for damaged, loose, or missing parts, signs of wear.
    Restraints and Safety Systems
      Inspect restraint system components. Make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired. Have any torn or frayed safety belts replaced. Also look for any opened or broken air bag coverings, and have them repaired or replaced. The air bag system does not need regular maintenance.
    Fuel Supply Line
      Inspect fuel system for damage or leaks.
    Fluids
      Fluids visual leak check (or every 12 months, whichever occurs first). A leak in any system must be repaired and the fluid level checked.
    Exhaust System
      Inspect exhaust system and nearby heat shields for loose or damaged components.
    Evaporative Emissions System
      Evaporative control system inspection. Check all fuel and vapor lines and hoses for proper hook-up, routing, and condition. Check that the purge valve, if the vehicle has one, works properly. Replace as needed.
    Drive Belt
      Inspect accessory drive belt. Visually inspect belt for fraying, excessive cracks, or obvious damage (or every 10 years whichever occurs first). Replace belt if necessary.
    Coolant
      Inspect engine coolant level. Add coolant if necessary.
    Brakes and Traction Control
      Inspect Brake System (or every 12 months whicherer occurs first). Visually inspect brake lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc. Inspect disc brake pads for wear and rotors for surface condition. Inspect other brake parts, including calipers, parking brake, etc.
Replace
    Oil Filter, Engine
    Engine Oil
      Change engine oil and filter, or every 12 months whichever occurs first. Reset the oil life system.
    Air Filter Element
      Replace engine air cleaner filter.
Rotate
    Wheels and Tires
      Rotate tires if necessary. Reset tire pressure monitor.
Flush
    Cooling System
      Engine cooling system service (or every 5 years, whichever occurs first). Drain, flush, and refill cooling system.