Non-Hybrid Greater Than/Equal to 3900 KG (8600 Lb) GVW

Rear Wheel Speed Sensor Ring Replacement

Removal Procedure

Note: The wheel speed sensor ring is integral to the wheel hub and must be replaced as an assembly.

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation Service and Repair.
3. Remove the rear brake rotor. Refer to Rear Brake Rotor Replacement .
4. Remove the rear axle hub. Refer to Rear Axle Hub, Bearing, Cup, and/or Seal Replacement Rear Axle Hub, Bearing, Cup, and/or Seal Replacement.

Installation Procedure

1. Install the rear axle hub. Refer to Rear Axle Hub, Bearing, Cup, and/or Seal Replacement Rear Axle Hub, Bearing, Cup, and/or Seal Replacement.
2. Install the rear brake rotor. Refer to Rear Brake Rotor Replacement .
3. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation Service and Repair.