Operation CHARM: Car repair manuals for everyone.

Generator Bracket Replacement (LH8)




Generator Bracket Replacement (LH8)

Removal Procedure




1. Remove the generator. Refer to Generator Replacement (LLV/LLR) Service and RepairGenerator Replacement (LH8) Generator Replacement (LH8).
2. Remove the power steering pump. Refer to Power Steering Pump Replacement (LLV, LLR) Power Steering Pump ReplacementPower Steering Pump Replacement (LH8) Power Steering Pump Replacement (LH8).
3. Remove the drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement Service and Repair.
4. Remove the engine wiring harness bracket bolt (4).
5. Reposition the engine wiring harness bracket out of the way.




6. Remove the generator bracket bolts.
7. Remove the generator bracket.

Installation Procedure




1. Install the generator bracket.

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the generator bracket bolts and tighten to 50 Nm (37 lb ft).




3. Position the engine wiring harness bracket to the generator bracket.
4. Install the engine wiring harness bracket bolt (4) and tighten to 40 Nm (29.5 lb ft).
5. Install the drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement Service and Repair.
6. Install the power steering pump. Refer to Power Steering Pump Replacement (LLV, LLR) Power Steering Pump ReplacementPower Steering Pump Replacement (LH8) Power Steering Pump Replacement (LH8).
7. Install the generator. Refer to Generator Replacement (LLV/LLR) Service and RepairGenerator Replacement (LH8) Generator Replacement (LH8).