6. Exhaust Turbocharger Outlet Pipe Adapter Removal

Exhaust Turbocharger Outlet Pipe Adapter Removal

Special Tools

CH 49736 - Hydrocarbon Injector Quick Connect Release Tool

For equivalent regional tools, refer to Special Tools Special Tools.





1. Remove the exhaust adapter heat shield bolts (1).

2. Remove the exhaust adapter heat shield (2).





3. Remove the exhaust adapter to right exhaust pipe bracket bolt (1).





4. Remove the NOx sensor (1).





Caution:
Care should be taken while handling the exhaust temperature sensor to prevent internal damage.

5. Remove the exhaust temperature sensor (1).





6. Remove the indirect fuel injector bolts (1).

7. Remove the fuel feed pipe clip bolts (2).





8. Remove the indirect fuel injector retainer (1) from the fitting.

9. Remove the indirect fuel injector (2) using the CH 49736 - tool.





10. Loosen the exhaust adapter holding clamp (1).





11. Remove the exhaust adapter (2) and exhaust adapter holding clamp (1).