52. Turbine Shaft Seal Installation

Turbine Shaft Seal Installation

Special Tools

* J 36418-1B - Turbine Shaft Seal Installer

* J 36418-2A - Turbine Shaft Seal Sizer





1. Use the J 36418-1B - seal installer (1) in order to install the four turbine shaft oil seal rings (619).

2. Resize oil seal rings (619) after installation:

1. Place J 36418-2A - seal sizer (2) over the turbine shaft oil seal rings (619) and seat against input housing.

2. Remove J 36418-2A - seal sizer (2).

3. Turn J 36418-2A - seal sizer (2) upside down and place over the turbine shaft oil seal ring (619).

4. Seat against input housing.

5. Leave J 36418-2A - seal sizer (2) in place over the turbine shaft oil seal rings (619) until the reverse input clutch housing is installed.