77.Oil Level Indicator and Tube Installation

Oil Level Indicator and Tube Installation




1. Apply sealant GM P/N 12346004 (Canadian P/N 10953480) or equivalent, around the oil level indicator tube 13 mm (0.5 in) below the tube bead.
2. Install the oil level indicator tube into the engine block. Rotate the oil level indicator tube into position.

Caution: Refer to Fastener Caution Fastener Caution.

3. Install the oil level indicator tube bolt and tighten to 12 Nm (106 lb in).




4. Install the oil level indicator into the oil level indicator tube, if required.