Fan Pulley Replacement

Fan Pulley Replacement

Removal Procedure




1. Remove the drive belt. Refer to Drive Belt Replacement .
2. Remove the fan clutch. Refer to Fan Clutch Replacement (Diesel) .
3. Disconnect the camshaft position (CMP) sensor electrical connector.




4. Remove the fan pulley bolts/nuts.
5. Remove the fan pulley.

Installation Procedure




1. Install the fan pulley.
Caution: Refer to Fastener Caution Fastener Caution.

2. Install the fan pulley bolts/nuts.

Tighten the bolts/nuts to 41 Nm (30 lb ft).




3. Connect the CMP sensor electrical connector.
4. Install the fan clutch. Refer to Fan Clutch Replacement (Diesel) .
5. Install the drive belt. Refer to Drive Belt Replacement .