Campaign - Rear Vision Camera Guideline Feature Is Inop.
SERVICE UPDATEBulletin No.: 12252
Date: October 25, 2012
Subject: 12252 Service Update for Inventory and Customer Vehicles Rear Vision Camera Guideline Feature Not Working Expires with Base Warranty
Models:
2012-2013 Chevrolet Silverado HD 3500
2012-2013 GMC Sierra HD 3500
Single Rear Wheel Drive Vehicles Equipped with Navigation Radio
This service update includes vehicles in dealer inventory and customer vehicles that return to the dealership for any reason. This bulletin will expire at the end of the involved vehicle's New Vehicle Limited Warranty period.
Purpose
This bulletin provides a service procedure to reprogram the radio module on certain 2012-2013 model year Chevrolet Silverado and GMC Sierra HD 3500 single rear wheel drive vehicles that are equipped with a navigation radio. The guideline overlay, which assists the driver when backing into a parking spot, does not display when the Rear Vision Camera (RVC) system is used.
This service procedure should be completed as soon as possible on involved vehicles currently in dealer inventory and customer vehicles that return to the dealer for any type of service during the New Vehicle Limited Warranty coverage period.
Vehicles Involved
All involved vehicles are identified by VIN in the Global Warranty Management System - Investigate Vehicle History Application. Dealership technicians should always check this site to confirm vehicle involvement prior to beginning any required inspections and/or repairs. It is important to routinely use this tool to verify eligibility because not all similar vehicles may be involved regardless of description or option content.
Additionally, a list of involved vehicles currently in dealer inventory is available on the "Service Update Bulletin Information" link under the "Service" tab in GM GlobalConnect (US) or attached to the GlobalConnect message (Canada) used to release this bulletin. Customer vehicles that return for service, for any reason, and are still covered under the vehicle's base warranty should also be checked for vehicle eligibility.
Parts Information
No parts are required for this service update.
Service Procedure
Do not attempt to order the calibration number from GM Customer Care and Aftersales. The calibration numbers required for this service procedure are programmed into control modules via a Multiple Diagnostic Interface (MDI) with the calibration update. When using a MDI for reprogramming, ensure that it is updated with the latest software version. Use TIS2WEB on or after 10/26/12 to obtain the calibration. If you cannot access the calibration, call the Techline Customer Support Center and it will be provided.
For step-by-step programming instructions, please refer to SI and the Techline Information System (TIS) terminal.
1. Verify that there is a battery charge of 12 to 15 volts. The battery must be able to maintain a charge during programming. Only use an approved Midtronics(R) PSC 550 Battery Maintainer (SPS Programming Support Tool EL-49642) or equivalent to maintain proper battery voltage during programming.
2. Reprogram the radio. Refer to SI and Service Programming System (SPS) documentation for programming instructions, if required.
1. Connect the MDI to the vehicle.
2. Select J2534 MDI and Reprogram ECU from the Select Diagnostic Tool and Programming Process screen.
Note
Determine the module part number as read by either GDS or Tech 2.
3. Select RAD Radio from the Supported Controllers screen.
4. Follow the on-screen instructions.
3. Clear all diagnostic trouble codes (DTCs).
Warranty Transaction Information
Submit a transaction using the table below.
Dealer Program Responsibility
Whenever a vehicle subject to this service update enters your vehicle inventory, or is in your facility for service in the future, and the vehicle is still covered under the New Vehicle Limited Warranty, you must take the steps necessary to be sure the service update correction has been made before selling or releasing the vehicle.
Disclaimer