Pitman Arm: Service and Repair

Pitman Arm Replacement

Special Tools

CH-47965 - Pitman Arm Puller

For equivalent regional tools, refer to Special Tools Steering Linkage.

Removal Procedure

1. Remove the steering gear. Refer to Steering Gear Replacement (HP2) Steering Gear Replacement (Hydraulic Rack and Pinion) Steering Gear Replacement (Hydraulic Rack and Pinion)Steering Gear Replacement (L96) Steering Gear Replacement (6.6L) .
2. Place the steering gear into a vise.




3. Remove the pitman arm nut (1) and washer (2).
4. Remove the pitman arm from the pitman arm shaft using CH-47965 - puller.

Installation Procedure

1. Install the pitman arm onto the steering gear.





Caution: Refer to Fastener Caution Fastener Caution.

2. Install a new pitman arm washer (2) and nut (1) and tighten to 370 Nm (273 lb ft).
3. Remove the steering gear from the vise.
4. Install the steering gear. Refer to Steering Gear Replacement (HP2) Steering Gear Replacement (Hydraulic Rack and Pinion) Steering Gear Replacement (Hydraulic Rack and Pinion)Steering Gear Replacement (L96) Steering Gear Replacement (6.6L) .
5. Adjust the front toe. Refer to Wheel Alignment Measurement Wheel Alignment Measurement and/or Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment.