67. Engine Flywheel Installation

Engine Flywheel Installation

Special Tools

* EN-38122-A - Crankshaft Balancer Holder

* EN-43653 - Flywheel Holding Tool

* EN-45059 - Angle Meter

For equivalent regional tools, refer to Special Tools Special Tools.





1. Install the flywheel.

2. Install NEW bolts.

Caution:
Refer to Fastener Caution Fastener Caution.

Note:
EN-43653 - flywheel holding tool may be used instead of EN-38122-A - holder in order to prevent crankshaft rotation.

3. Holding the crankshaft balancer with EN-38122-A - holder, tighten the bolts evenly. Tighten the bolts to 53 Nm (39 lb ft), plus 25 degrees using the EN-45059 - meter