Drivetrain and Front Suspension Frame Front Crossmember Replacement (2500 4WD)

Drivetrain and Front Suspension Frame Front Crossmember Replacement (2500 4WD)












2.Remove the oil pan skid plate. Refer to Oil Pan Skid Plate Replacement .

1Engine Front Crossmember Nut (Qty: 2)
Caution:Refer to Fastener Caution .
Tighten
1.70 N �m (52 lb ft)

2.Plus 110 degrees

2Engine Front Crossmember Bolt (Qty: 2)

Procedure

1.Remove all traces of the original adhesive patch.

2.Clean the threads of the bolt with denatured alcohol or equivalent and allow to dry.

3.Apply threadlocker GM P/N 12345493 (Canadian P/N 10953488).

3Engine Front Crossmember Nut (Qty: 2)Tighten
1.70 N �m (52 lb ft)

2.Plus 110 degrees

4Engine Front Crossmember Bolt (Qty: 2)

Procedure

1.Remove all traces of the original adhesive patch.

2.Clean the threads of the bolt with denatured alcohol or equivalent and allow to dry.

3.Apply threadlocker GM P/N 12345493 (Canadian P/N 10953488).

5Lower Control Arm Crossmember