Seats: Adjustments

Rear Seat Adjuster Track Adjustment

Inspection and Cleaning Procedure

1. Remove the rear seat. Refer to Rear Seat Removal and Installation (40%) Rear Seat Removal and Installation (40%)Rear Seat Removal and Installation (60%) Rear Seat Removal and Installation (60%).

2. Inspect the seat track for debris or foreign materials, if the track needs to be cleaned, perform the following steps:

Warning:
Refer to Safety Glasses and Compressed Air Warning Safety Glasses and Compressed Air Warning.


Note:
Use care when using compressed air to clear the sunroof drain hose. Do not exceed 241 kPa (35 psi).

* Use a flexible wire or 689 kPa (100 psi) of compressed air to clear any material plugging the obstructing the seat track.

* The mechanical components of the seat track assembly receive lubrication during assembly. If any seat track needs additional lubrication, use multi-purpose lubricant GM P/N 12346241 (Canadian P/N 10953474) or equivalent.

3. Install the rear seat and test for proper operation. Refer to Rear Seat Removal and Installation (40%) Rear Seat Removal and Installation (40%)Rear Seat Removal and Installation (60%) Rear Seat Removal and Installation (60%).