Power Steering Fluid Reservoir Outlet Hose Replacement

Power Steering Fluid Reservoir Outlet Hose Replacement (Without LGH)

Removal Procedure

1. Place drain pans under the vehicle.





2. Remove as much power steering fluid from the reservoir as possible.

3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.

4. If necessary, remove the left front wheelhouse splash shield. Refer to Wheelhouse Splash Shield Replacement Service and Repair.

Caution:
Refer to Power Steering Hose Disconnected Caution Service Precautions.

5. Disconnect the power steering fluid reservoir outlet hose from the power steering pump.

6. Disconnect the power steering fluid reservoir outlet hose from the reservoir.

7. Remove the power steering fluid reservoir outlet hose from the vehicle.

Installation Procedure





Caution:
Refer to Installing Hoses without Twists or Bends Caution Installing Hoses without Twists or Bends Caution.

1. Position the power steering fluid reservoir outlet hose in the vehicle.

2. Connect the power steering fluid reservoir outlet hose to the power steering pump.

3. Connect the power steering fluid reservoir outlet hose to the reservoir.

4. If you removed the left front wheelhouse splash shield, install the splash shield. Refer to Wheelhouse Splash Shield Replacement Service and Repair.

5. Fill and bleed the power steering system. Refer to Power Steering System Bleeding Service and Repair.

6. Clean any excess power steering fluid from the vehicle.

7. Remove the drain pans from under the vehicle.

8. Lower the vehicle.