Ground Strap: Service and Repair
Engine Ground Strap Replacement
Removal Procedure
1. Remove the engine cover. Refer to Engine Cover Replacement Service and Repair.
Remove the engine wiring harness ground bolt.
2. Reposition the engine wiring harness ground and ground strap.
3. Remove the ground strap nut from the stud at the front of dash.
4. Remove the ground strap from the stud.
Installation Procedure
1. Install the ground strap to the stud.
Caution:
Refer to Fastener Caution Fastener Caution.
2. Install the ground strap nut to the stud at the front of dash and tighten to 9 Nm (80 lb in).
3. Position the ground strap and engine wiring harness ground.
4. Install the engine wiring harness ground bolt and tighten to 16 Nm (12 lb ft).
5. Install the engine cover. Refer to Engine Cover Replacement Service and Repair.